product has resulted in the development of three new smaller versions
that allow TIME products to be used in a wider variety of applications.
The incredible appeal of the original TIME speakers ability to descend
from the ceiling remains, along with the ability to focus the sound
directly at any listening area.
However, unlike the original TIME
speakers, the vertical angle is set at a fixed 45 degrees and the
rotation of the drivers is done manually during installation and set-up
by the installer. Each model features up to 340 degrees of rotation
assuring that virtually any location can be targeted. Once adjustments
have been made, the system simply descends from and retracts into the
ceiling when desired. The automation can be triggered by signal sensing,
contact closure, or IR command, depending on your preference. When
fully retracted only a solid flat surface is seen. This flat surface can
be easily painted allowing the system to blend seamless into a room
when not in use.
All of this is achieved by a dedicated control
unit that handles up to 8 loudspeakers allowing for stereo, 5.1, 6.1, or
7.1 theater systems. Connections for power and control are made with
standard CAT-5 cable and RJ45 termination. The speakers themselves are
powered by any amplification via standard speaker wire. The control unit
also doubles as a 150-watt subwoofer amplifier that matches up
perfectly with the new 8-inch, in-wall Cinema Sub.
Now any
system can disappear from view and reappear on command. Watch your
customers respond when they experience TIME Mini. See why so many people
have fallen in love with the Theater In Motion Experience.
– Motorized In-Ceiling Speaker Descends when Activated |
– Manually Adjustable 360 Rotation |
– 2.5″ Composite Cone Woofer |
– Requires TIME Mini Amp/Controller |
Frequency Response: | 150Hz 20kHz 3dB |
Efficiency: | 89dB 1W/1m |
Impedance: | 8 Ohms Compatible |
Power Recommendations: | 80 Watts |
Cut-Out Diameter: | 5 1⁄2″ |
Diameter x Depth: | 5 7⁄8″ x 8 1⁄16″ |
Reviews
There are no reviews yet.